Learn2010 Posted June 20, 2018 Report Share Posted June 20, 2018 I have been creating programming to develop PDF files. On the desktop computer, they open to a nice clean document just as it was built. When creating these same documents on the laptop, the print is distorted in various places. Is there a setting somewhere in Nitro that can fix this, or, is it an issue with a computer setting? Thank you. Link to comment Share on other sites More sharing options...
Official Nitronaut Allain Umailin Posted June 20, 2018 Official Nitronaut Report Share Posted June 20, 2018 Hello @Learn2010, Thank you for reaching out to us through our Community Forums! Are you using Nitro Pro 12? If yes, kindly run Nitro Pro with higher DPI mode by referring to these steps: 1. Right-click Nitro Pro desktop shortcut or the NitroPDF.exe (by default is installed in C:\Program Files\Nitro\Pro\12) then select Properties 2. Nitro Pro Properties window will open, click on Compatibility tab 3. Under Settings, click on Change high DPI settings. 4. Another Nitro Pro Properties window will open. 5. Enable Override high DPI scaling behavior. 6. OK > OK to save the setting and test Nitro Pro again. Thanks for choosing Nitro Pro and I hope this helps! Link to comment Share on other sites More sharing options...
Learn2010 Posted June 20, 2018 Author Report Share Posted June 20, 2018 Nitro Pro 11. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.