Jump to content

using different computer and need to be able to use NitroPro on it


Recommended Posts

Renee Mullins
Posted

Our entire building will be working remote for about 3 weeks.  I have NitroPro, paid version, installed on my desktop at the office but will be using a laptop for remote until we are allowed back onsite.  I couldn't locate my serial number on my desktop version.  I need to be able to use the software while working remote.  Please advise.

Thank you,

Renee 

  • Official Nitronaut
Allain Umailin
Posted

Hello @rmullins@diamondhealth.com,

Thank you for reaching out to us through our Community Forums!

To further assist you with your concern, I just sent you a private message with steps to perform in order to install and activate Nitro Pro 13.

Thank you for choosing Nitro and I hope this helps!

  • 4 months later...
Renee Mullins
Posted

Hi.  You helped me back in March when I started working remotely.  I had to get another laptop.  Can you help me get the program installed on the new laptop?

Thank you,

Renee Mullins

  • Official Nitronaut
Allain Umailin
Posted

Hello @rmullins@diamondhealth.com,

Thank you for reaching out to us through our Community Forums!

Are you seeking help in installing your Nitro Pro on your 3rd machine?

Also, could you please provide the serial number of your Nitro Pro?

To send it via private message, hover your mouse on top of my name 'AllainU' and select 'Message'.

Thank you very much in advance and I am looking forward to hearing back from you.

David Harper
Posted

Hi,

I am having a similar activation problem. I have a single user license allowing two activations. I have updated my computers and have deleted Nitro Pro 12 off them. I have been to the activation portal and deactivated all. It shows zero activations. However, when I install Nitro Pro on my new computer and try to activate with existing serial number I get an error saying I have exceeded my activations. Can you please advise how to fix this error? Can send you my serial number.

Thanks

Dave

  • Official Nitronaut
Allain Umailin
Posted

Hello @David Harper,

Thank you for reaching out to us through our Community Forums!

On the machine you're having issue activating, I just made an adjustment on your license, so you can now activate your copy of Nitro Pro by going to Help tab > About Nitro Pro > Activate, entering your serial number and clicking Activate.

Our record shows you are experiencing an issue activating the license is because the computer that the software was installed on did not generate a proper Computer ID (which is a Nitro-specific ID, which generates a unique Computer ID for each computer that the software is installed on). Instead, a Computer ID of all '0's was generated.

Thank you for choosing Nitro and I hope this helps.

  • Official Nitronaut
Allain Umailin
Posted

Hello @rmullins@diamondhealth.com,

Thank you for the private message.

To fix this issue, you can release your license by going to https://licenses.gonitro.com/prd/portal 

Install Nitro Pro 13 using below direct installers:

x32 http://install.nitropdf.com/professional_13192356/en/retail/nitro_pro13_ba_x86.msi 
x64 http://install.nitropdf.com/professional_13192356/en/retail/nitro_pro13_ba_x64.msi

If you are not sure which to pick, this will help: https://kb.gonitro.com/knowledgebase#/search/64/000003790 

After installation, you can activate by opening Nitro Pro, clicking on the Help tab > About Nitro Pro > Activate by entering your serial number

Thank you for choosing Nitro and I hope this helps. 

Michael Erbacher
Posted

Hello @rmullins@diamondhealth.com,

AllainU

 

Hi I have had to rebuild my computer from scratch and have lost all settings relevant to Nitro Pro. Have now tried to reinstall without success, going round in cercles with install and activation and deactivation process. Says I can deactivate 2 and have done this but still cant reinstall my Nitro Pro getting error message #23 License number already used. Please help

Thanks

Michael

Renee Mullins
Posted (edited)

When I enter the serial number, another page populates which states the following:

 

Once you click “Deactivate”, you can activate your license immediately by entering the below serial number into Nitro Pro.

Serial Number

5049xx-xxxxxx-xxxxxx

Version

13

Status

Active

Number of Activations

2

Number of Activations Allowed

2

Deactivate

 

I’m not sure what to do.

Please advise.

 

Thank you,

Renee

Edited by AllainU
Renee Mullins
Posted

when IT installed for me, it reverted  back to the Trail Version.  I went through the steps - Help-About Nitro Pro - Activate- entered serial number.  Received a response that there were too many computers activated with this license.  

Please advise.

Thank you,

Renee 

Renee Mullins
Posted

Disregard previous message. was able to install.  However, I don't see any of my previous documents unless I pull directly where they're saved. Shouldn't I be able to see previous folders/documents?

Thank you,

Renee

Michael Erbacher
Posted
16 hours ago, rmullins@diamondhealth.com said:

5049xx-xxxxxx-xxxxxx

I have left one message already its not easy to fid out how to get support here.

I have had to rebuild my computer and include a new install of Nitro.

I have been through the activate deactivate process which goes around in circles and I wind up with an error message. I cant see how to activate my reinstall of Nitro Pro. Help Please.

  • Official Nitronaut
Allain Umailin
Posted

Hello @Michael Erbacher,

Thank you for reaching out to us through our Community Forums!

Before continuing, please be aware that Nitro Pro 11 or older are already discontinued as documented in our Sunset Policy: https://www.gonitro.com/support/sunset-policy . With that, support for the discontinued versions are no longer available.  

If you are interested in upgrading your license to Nitro Pro 13 with a discounted rate, kindly access our Upgrade Portal and enter your Nitro Pro 10 serial number: https://www.gonitro.com/pro/upgrade 

 

However if you prefer working with an older version and as a courtesy, kindly uninstall the version you currently have by going to Control Panel \ Programs \ Programs and Features, reboot your machine and download Nitro Pro 10 installers from this page:  https://kb.gonitro.com/knowledgebase#/search/online/000004464

If you are not sure which to pick, this will help: https://kb.gonitro.com/knowledgebase#/search/64/000003790 

After installation, you can activate by opening Nitro Pro, clicking on the Help tab > About Nitro Pro > Activate by entering your serial number.

Thank you for choosing Nitro and I hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.